Lets get started!click here) for the bandana bib.
Use the pattern to create a cotton top piece and a microfibre fleece backing.
Layer your piecesPlace your fleece right side up.
Place your cotton on top right side facing down.
Pin together both layers.
Sew a continuous line all the way around the bib.
Stop sewing approximately 2 inches before you started, to leave a gap.
Remember to add reverse stitching at the start and finish.
Cut close to the stitching. But, be careful not to cut the sttiches.
Iron the bib flat making sure that where the gap has a nice finish.
I like to use the needle in the right hand position and the use the edge as a guide.
I like to use Kam snaps.
You can use velcro if you want to.
Please note that this tutorial is for personal use only. If you wish to use our pattern to make bibs to sell at craft fayres, on-line or via any retail outlet you will need to purchase a license from us.